飞机穿越烟气流场的响应计算与分析

本文把烟气流作为一种人为的风切变场,分析和计算了烟气流的抬升夹卷模式,讨论了飞机对称穿越烟气流场时的响应。可为电厂和机场的相关设计提供参考依据。     

Increased urinary excretion rates of serotonin and metabolites during bedrest

Astronauts are often on a voluntarily reduced energy intake during space missions, possibly caused by a metabolic or emotional stress response with involvement of the central serotonergic system (SES). We investigated 24 h urinary excretion (24 h-E) of serotonin (5-HT) and 5-hydroxyindol acidic acid as indicators of the SES in healthy males under two different normocaloric conditions: normal physical activity (NPA) and -6 degree head-down-tilt (HDT). HDT or NPA were randomly arranged with a recovery period of 6 months in between. 24 h-E of hormones varied widely among individuals. Values were higher in HDT compared to NPA. Assuming that the 24 h-E values are, beside being indicators for alterations in the number and metabolism of platelets. Also indicators of central SES, HDT condition seems to activate central SES in a higher degree compared to NPA. Therefore, changes in central SES might be involved in the mechanisms associated with space flight or microgravity, including possible maladaptations such as voluntary undernutrition.     

航空带垫卡箍刚度及阻尼特性分析与试验验证

研制了带垫卡箍刚度测试装置,分别对不同规格卡箍线刚度和扭转刚度进行了测量,并将卡箍刚度测量数值引入卡箍-管路系统有限元模型,通过管路固有特性数值计算与试验测试结果对比,误差在5％左右,验证了卡箍刚度参数的准确性.进一步搭建了卡箍阻尼测量系统,通过测量卡箍动态传递率,获得相对应的模态阻尼比,并将卡箍阻尼测量数值引入卡箍-...     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

一种冲击响应谱试验设备校准装置的研制

介绍了冲击响应谱基本概念及其试验设备的分类与工作原理，参考现行冲击试验台检定规程提出了针对该设备的校准方法，设计了一种基于虚拟仪器技术的新型冲击响应谱试验设备校准装置，给出了典型冲击波形（半正弦、矩形、后峰锯齿）的冲击响应谱仿真计算结果并进行了验证，计算结果与理论结果完全一致，证明算法准确可靠，能够实现对冲击响应谱试验设备的校准。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

基于二阶滑模算法的永磁电机直接转矩控制

针对传统直接转矩控制(DTC)方法低速控制精度差、转矩脉动大、开关频率不稳定等问题,提出了一种基于二阶滑模控制的永磁电机DTC方法。该控制方法基于二阶滑模控制原理,将传统磁链控制器与转矩控制器以滑模控制器替代,对空间电压进行矢量调制,提高了开关频率的稳定性,获得了良好的动态稳定性,改善了电机输出性能。仿真与试验结果表明,该控制方法能够有效减小电流脉动与转矩脉动,同时提高了控制系统的抗干扰能力,实现了电机的快速动态响应,具有较强的鲁棒性能。     

基于本征正交分解的叶片碰摩系统降阶方法

针对叶片碰摩响应求解问题,提出了采用本征正交分解进行动力学降阶的方法。通过对快照矩阵进行本征正交分解生成投影子空间,将系统动力学方程投影到子空间进行模型降阶,并结合数值积分方法进行了碰摩响应求解。基于降阶模型分析了不同转速及侵入量参数下的叶片碰摩响应,并与全阶模型进行了对比。结果表明:降阶模型的时域响应幅值偏差小于5%,计算效率了提升98.4%;通过改变叶片转速、侵入量参数验证了降阶模型的鲁棒性,并且发现随着转速、侵入量的增加,本征正交模态能量在低阶与高阶之间发生转移,并呈现出不同的传递规律,由转速引起的模态能量转移与结构的固有频率存在一定关系。该方法及结论可为叶片碰摩分析及故障诊断提供依据。